How To Install Window Blinds In Orlando

Many Orlando homeowners choose window blinds when they require more privacy and management over natural light in their properties. They’re a practical and budget-friendly window covering. They also take just a handful of steps to install for skilled do-it-yourselfers. Even so, nothing is better than working with a professional window treatment installer. Here are the essential steps of installing window blinds and when you should phone the professionals to handle it for you.

Measure And Mark Everything Exactly

Before you begin, determine if you need inside-mount or outside-mount blinds. This vital decision will tell you where to measure. Take measurements of the height, width, and depth within your frame for inside-mount installations. When hanging outside-mount blinds, mark the width and height of your window, which includes the trim, and add three inches to each measurement to make sure you have good coverage. Measure exactly–refrain from rounding up or down. Improperly measured blinds will fail to function correctly.

Choose Your Blinds

When you get your dimensions, you can find your blinds. You probably know what style of blinds you want. Pick blinds that are as close to your measurements as possible. Off-the-rack blinds might not fit perfectly, either sticking out too much or not meeting the end of the window properly. Be sure to are provided hardware that lets your blinds attach at the proper depth, as well. You’ll need to go with specially made blinds and parts for the best fit.

Install Your Blinds

Your blinds may come with instructions. Use them to attach your specific product. If you wish to have a preview of how difficult it is to install window blinds in Orlando, here are several general steps to provide a better idea.

 

Inside Mount Blinds

 

1. Put a bracket on the top of the window’s frame around an inch from the outer edge. Make sure this spot won’t interfere with the blind’s function. Indicate the bracket holes with a pencil.
2. Drill pilot holes on your marks.
3. Align the hardware where you drilled and drill in the screws.
4. Repeat the initial three steps for the next bracket.
5. Snap the end caps onto the blind’s top rail. Fit the rail into the brackets.

Hook on the tilt wand and test. Also, evaluate the pull cord.

Outside Mount Blinds

1. Figure out if you’re installing on the wall above the window or the trim. Hold up the headrail and make certain the blind covers the bottom of the window.
2. Mark each end of the headrail.
3. Measure four inches from your headrail marks and mark your bracket holes here.
4. Drill pilot holes in the proper spots.
5. Align the bracket holes with the pilot holes and attach with screws.
6. Slide the headrail into the brackets.

Hook on the tilt wand and test out everything to make sure it works.

Choose The Easiest Way To Install Blinds 

Just a reminder, you don’t need to do blinds by yourself. The simplest way to install window blinds in Orlando is to employ a trusted window treatment installer. They will guide you every step of the way. They’ll help you select blinds that match your needs and preferences, make precise measurements for a custom product, and install them for you. They guide customers each day, so they’ll do it swiftly and accurately. They’ll be able to troubleshoot any issues without spending hours searching for help on the Internet. A window treatment installer will also provide better-quality blinds than online or box stores.

Avoid The Trouble And Ask Sunburst Shutters To Install Your Window Blinds In Orlando

Upgrading to new window blinds in Orlando couldn’t be easier when you turn to Sunburst Shutters Orlando. We’ll help you choose made-to-order blinds that will match your windows perfectly, and our skilled installation team will attach them for you. All you must do is call 407-630-7011 or complete the following form to schedule a complimentary in-home consultation.