The Guide To Closing Your Energy Efficient Shutters In The Winter, Orlando, FL!

December 29, 2015

This January, residents in Orlando are finding things to do to get maximum energy efficiency for their homes. And it takes more than a simple window treatment. Maximizing energy efficiency starts with the right window treatments. The right shutters.

Completely closed, these energy efficient shutters sustain the space at a comfortable temperature. Here a guide to closing Polywood® plantation shutters for ultimate energy efficiency this winter season, Orlando, FL!

Maximizing Energy Efficiency Starts With The Right Shutters In Orlando

Window fashions like blinds, shades, and curtains are manufactured from substances that do not insulate well. Not only are the materials porous, but they also leave some space around the edge of the material that lets in chilly air during the winter months. Plantation shutters are the most energy efficient window treatment money can buy in Orlando, FL. That’s because of the frame that seals each corner of the window and the rigid material that shutter components are made of.

Polywood plantation shutters are fashioned with a frame to seal off the sides of the window. They’re made from a solid polymer, with exclusive weatherstripping. This means Polywood shutters reduce airflow by up to 30%. And insulate 70% better than an equivalent solid wood shutter. That’s why they’re the most energy efficient shutters.

Steps To Closing Your Plantation Shutters For Maximum Energy Efficiency In The Winter

1. Close The Panels:

When the shutter panels are open on either side of the window, gently swing them toward the window pane to cover it. This will create another layer to the much colder temperatures of Orlando winters.

2. Interlock The Weatherstripping

Interlocking the weatherstripping on plantation shutters

In the same motion of shutting the shutters, don’t forget to interlock the weatherstripping. That’s an exclusive feature only available on Polywood shutters from Sunburst Shutters Orlando. The layer of weatherstripping is found on the vertical sides of the panels where they meet in the heart of your window. Double check that the weatherstripping material interlocks so that no air or light can enter.

3. Close The Louvers

Closing the louvers on plantation shutters

Commonly, plantation shutters feature a front mount tilt rod. By pushing the tilt rod in and up, the shutter louvers tilt up. As the louvers are shifted, the window shutters are entirely closed. In this position, the shutter louvers are blocking air and light, thanks to the way Polywood louvers are made.

For rear mount tilt rods, move a louver up and the other louvers move up with it.

4. Push the tilt rod into the mousehole

Pushing the tilt rod into the mousehole of plantation shutters for energy efficiency

Once all the louvers are tilted upward, press the tilt rod into the mousehole-shaped notch in the shutter frame. This makes sure the louvers are closed as tightly as possible. Now the louvers are vertical, allowing for more light and temperature blocking.

Watch this clip for a step-by-step of how to close your Polywood shutters to maximize energy efficiency.

Ask Your Local Specialist About Energy Efficient Shutters In Orlando, FL

Got more questions about using your indoor shutters for maximum energy efficiency? Looking to purchase energy efficient window shutters in Orlando, FL? Our specialists can answer all your questions and walk you through choosing energy efficient shutters. Call us at 407-630-7011 or fill out the form below to schedule a free in-home design consultation today!

Back to Blog